Closed

Space Critical EEE Components for EU non-dependence – Advanced Packages and Memories

HORIZON Research and Innovation Actions

Basic Information

Identifier
HORIZON-CL4-2025-02-SPACE-74
Programme
SPACE-HADEA
Programme Period
2021 - 2027
Status
Closed (31094503)
Opening Date
May 22, 2025
Deadline
September 25, 2025
Deadline Model
single-stage
Budget
€10,000,000
Min Grant Amount
€10,000,000
Max Grant Amount
€10,000,000
Expected Number of Grants
1
Keywords
HORIZON-CL4-2025-02-SPACE-74HORIZON-CL4-2025-02

Description

Expected Outcome:

Project results are expected to contribute to all of the following expected outcomes:

  • Reinforcing EU strategic autonomy by reducing non-EU dependencies on critical space EEE components and related technologies across their entire supply chain;
  • Providing unrestricted access to critical space EEE components and related technologies relevant for EU space missions;
  • Developing or regaining capacity to operate independently in space by developing resilient space EEE components and related technologies supply chains, relying on EU supply chains and/or trustable and reliable supply chains not affected by non-EU export restrictions;
  • Enhancing competitiveness by developing products and capabilities reaching equivalent or superior performance level than those from outside the EU and compete at worldwide level;
  • Opening new opportunities for manufacturers by reducing dependency on non-EU export restricted technologies.
Scope:

Unrestricted access to state-of-art space EEE components and related technologies is a pre-requisite for the EU space industry responding to EU space missions. However, especially for some families of components, the available solutions in EU do not meet the current high-performance space requirements. Currently, alternative products sourced from outside EU, are either affected by non-EU export control, that limits its use, or present challenges in terms of trustable supply chains for the implementation of EU space missions with a security dimension.

Within the frame of this topic, it is expected to finance and implement development projects aiming at maturing critical space EEE components with the final goal of lowering the dependency from outside EU. This will be done by establishing a long-term sustainable supply chain for supporting EU strategic autonomy in the space sector. The selection of the supply chains shall reflect this objective. Therefore, the supply chain shall preferably be built fully based in EU and when this can only be achieved partially (i.e. because of lack of current EU capabilities for unrestricted advanced semiconductor processes or advanced materials that cannot be developed within the project), services procured from outside EU shall nevertheless ensure that the overall supply chain will remain trustable and not affected by non-EU export control. The latest scenario is subject to the approval of the granting authority.

Below, the list of space EEE components and related technologies relevant for this Call. It has been identified based on needs related to strategic institutional space programs, inputs from European stakeholders and the EU Observatory of Critical Technologies:

  • Advanced packages – Organic substrate for very high, fine pitch [Target final TRL 6-7]
  • MRAM Memories [Target final TRL 7]

Additional context information and technical requirements are provided in the Technical Requirements Guidance document published on the Funding & Tenders Portal outlining all relevant information for each of the above-mentioned development lines.

A proposal should address only one technology area and clearly identify the area being addressed.

Space is a low volume market affected by a dynamic industrial landscape compared to the terrestrial market therefore, technological spin in and/or bilateral collaborations should be enhanced between European non-space and space industries. Furthermore, proposed activities should be complementary to relevant national and/or other activities at European level. Complementary activities should be clearly identified, described and the proposal should report how the complementarity is ensured.

To achieve the non-dependence objective, applicants are expected to include a dedicated proposal’s paragraph covering:

  • The description of the technology and/or technology processes and high-level breakdown of the space EEE component supply chain to be used. Applicants should demonstrate that the supply chain and final product are free of any legal export restrictions or limitations, such as those established in the International Traffic in Arms Regulations (ITAR) or equivalent instruments applicable in other non-EU jurisdictions. Applicants shall also report, in a dedicated subsection, if and which part of the supply chain is affected by non-EU export controls such as the Export Administration regulation (EAR) i.e. EAR99.
  • The description of the suitable technology development process that has been identified and set up within the consortium for avoiding export restrictions of non-EU states and assess vulnerabilities of the supply chain.

Proposal covering space EEE components and related technology developments that are targeting a final TRL equal or higher than 5, shall include a list of proposed applicable standards (e.g. EN, ECSS, ESCC, MIL, JEDEC,…) that are considered relevant for implementing a formal space evaluation and/or qualification. Additionally, projects that aim at a formal space qualification shall deliver the full data pack planned to be submitted to the qualification authority. This deliverable shall me marked sensitive and it shall be shared with the granting authority (i.e. DG-DEFIS and HaDEA). Products that will successfully complete the space evaluation/qualification either within the EU-COM activity or, as a consecutive follow up, shall inform DG-DEFIS and engrave on the package (if present) the EU flag.

The proposal must include specific tasks as part of the work plan and related dedicated confidential deliverables to be provided within 6 months from the start of the project to the relevant Commission DG and Executive Agency (i.e. DG-DEFIS and HaDEA), with the objective of:

  • Analysing and describing, in detail, the full supply chain, each entity and its role in the supply chain, level of criticality and, if relevant, identify dependencies from outside EU;
  • Describing the industrial technical roadmap and a business plan for commercialization with accurate understanding of applications needs, space mission insertion, including time to market indication, of the developed product.
  • Reporting the list of relevant non-EU export control with extra territorial applicability for the specific technology/product under development, independently from the supply chain established for the EU-COM project.
  • Undertaking a comprehensive literature review of the relevant technology/product reporting the state-of-the-art and highlighting potential gaps between current EU solutions and competition from outside EU.

Unless otherwise agreed with the granting authority before the grant agreement, beneficiaries must ensure that none of the entities that participate as affiliated entities, associated partners or subcontractors are established in countries which are not eligible countries or target countries set out in the call conditions.

It is recalled to the applicants that all provisions reported by the Model Grant Agreements, related to topics with restricted eligibility conditions, are applied. For example, under this light, the consortiums shall ensure that for a period up to 4 years after the end of the action, supply and availability of the products and/or processes developed and/or qualified within the project (consortium as whole or individual beneficiaries) shall be given to any entity in EU, at fair and reasonable market prices, conditions and with no legal restrictions and limitations stemming for example from International Traffic in Arms Regulations (ITAR), or equivalent instruments applicable in non-EU jurisdictions. Additionally, beneficiaries that intend to transfer ownership or grant an exclusive licence must formally notify the granting authority (i.e. DG-DEFIS and HaDEA) before the intended transfer or licensing takes place and the granting authority may up to four years after the end of the action object to a transfer of ownership or the exclusive licensing of results.

In this topic, the integration of the gender dimension (sex and gender analysis) in research and innovation content is not relevant.

Destination & Scope

 

Eligibility & Conditions

General conditions

1. Admissibility Conditions: Proposal page limit and layout

The page limit of the application is 80 pages.

described in Annex A and Annex E of the Horizon Europe Work Programme General Annexes.

Proposal page limits and layout: described in Part B of the Application Form available in the Submission System.

2. Eligible Countries

described in Annex B of the Work Programme General Annexes.

A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon Europe projects. See the information in the Horizon Europe Programme Guide.

3. Other Eligible Conditions

In order to achieve the expected outcomes, and safeguard the Union’s strategic assets, interests, autonomy, or security, namely avoiding a situation of technological dependency on a non-EU source, in a global context that requires the EU to build on its strengths and to carefully assess and address strategic weaknesses, vulnerabilities and high-risk dependencies, participation is limited to legal entities established in Member States and the following associated countries: Norway and Iceland. Proposals including entities established in countries outside the scope specified in the call/topic/action will be ineligible.

For the duly justified and exceptional reasons listed in the paragraph above, in order to guarantee the protection of the strategic interests of the Union and its Member States, entities established in an eligible country listed above, but which are directly or indirectly controlled by a non-eligible country or by a non-eligible country entity, may not participate in the action unless it can be demonstrated, by means of guarantees positively assessed by their eligible country of establishment, that their participation to the action would not negatively impact the Union’s strategic assets, interests, autonomy, or security. Entities assessed as high-risk suppliers of mobile network communication equipment within the meaning of ‘restrictions for the protection of European communication networks’ (or entities fully or partially owned or controlled by a high-risk supplier) cannot submit guarantees.[[The guarantees shall in particular substantiate that, for the purpose of the action, measures are in place to ensure that: a) control over the applicant legal entity is not exercised in a manner that retrains or restricts its ability to carry out the action and to deliver results, that imposes restrictions concerning its infrastructure, facilities, assets, resources, intellectual property or know-how needed for the purpose of the action, or that undermines its capabilities and standards necessary to carry out the action; b) access by a non-eligible country or by a non-eligible country entity to sensitive information relating to the action is prevented; and the employees or other persons involved in the action have a national security clearance issued by an eligible country, where appropriate; c) ownership of the intellectual property arising from, and the results of, the action remain within the recipient during and after completion of the action, are not subject to control or restrictions by non-eligible countries or non-eligible country entity, and are not exported outside the eligible countries, nor is access to them from outside the eligible countries granted, without the approval of the eligible country in which the legal entity is established.

]]

If projects use satellite-based earth observation, positioning, navigation and/or related timing data and services, beneficiaries must make use of Copernicus and/or Galileo/EGNOS (other data and services may additionally be used).

described in Annex B of the Work Programme General Annexes.

4. Financial and operational capacity and exclusion

described in Annex C of the Work Programme General Annexes.

5a. Evaluation and award: Award criteria, scoring and thresholds

To ensure a balanced portfolio covering all the development areas described in the scope section, grants will be awarded to applications not only in order of ranking but at least also to one proposal that is the highest ranked within each development area, provided that the applications attain all thresholds

are described in Annex D of the Work Programme General Annexes.

5b. Evaluation and award: Submission and evaluation processes

are described in Annex F of the Work Programme General Annexes and the Online Manual.

5c. Evaluation and award: Indicative timeline for evaluation and grant agreement

described in Annex F of the Work Programme General Annexes.

6. Legal and financial set-up of the grants

described in Annex G of the Work Programme General Annexes.

Specific conditions

described in the specific topic of the Work Programme.

Technical Guidance Document for the expected technology developments

The Technical Guidance Document is provided to clarify technological expectations.

Application and evaluation forms and model grant agreement (MGA):

Application form templates — the application form specific to this call is available in the Submission System

Standard application form (HE RIA, IA)

Evaluation form templates — will be used with the necessary adaptations 

Standard evaluation form (HE RIA, IA) 

Guidance

HE Programme Guide 

Model Grant Agreements (MGA)

HE MGA 

Declaration of ownership and control

A compulsory questionnaire on the declaration of ownership and control is to be filled by all project participants as part of the application. All declarations must be assembled by the coordinator and uploaded in a single file in the portal submission system. For additional information on the assessment of ownership and control process and on the guarantees please consult the draft guidance for participation in restricted calls.

Additional documents:

Support & Resources

Online Manual is your guide on the procedures from proposal submission to managing your grant.

Horizon Europe Programme Guide contains the detailed guidance to the structure, budget and political priorities of Horizon Europe.

Funding & Tenders Portal FAQ – find the answers to most frequently asked questions on submission of proposals, evaluation and grant management.

Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular.

National Contact Points (NCPs) – get guidance, practical information and assistance on participation in Horizon Europe. There are also NCPs in many non-EU and non-associated countries (‘third-countries’).

Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding.

IT Helpdesk – contact the Funding & Tenders Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc.

European IPR Helpdesk assists you on intellectual property issues.

CEN-CENELEC Research Helpdesk and ETSI Research Helpdesk – the European Standards Organisations advise you how to tackle standardisation in your project proposal.

The European Charter for Researchers and the Code of Conduct for their recruitment – consult the general principles and requirements specifying the roles, responsibilities and entitlements of researchers, employers and funders of researchers.

Partner Search help you find a partner organisation for your proposal.

Latest Updates

Last Changed: September 26, 2025

The call HORIZON-CL4-2025-02 closed on the 25/09/2025.

93 proposals have been submitted.

 

The breakdown per topic is:

·HORIZON-CL4-2025-02-11: 7 proposals

·HORIZON-CL4-2025-02-12: 9 proposals

·HORIZON-CL4-2025-02-13: 3 proposals

·HORIZON-CL4-2025-02-21: 5 proposals

·HORIZON-CL4-2025-02-22: 3 proposals

·HORIZON-CL4-2025-02-23: 3 proposals

·HORIZON-CL4-2025-02-24: 11 proposals

·HORIZON-CL4-2025-02-31: 20 proposals

·HORIZON-CL4-2025-02-32: 7 proposals

·HORIZON-CL4-2025-02-41: 2 proposals

·HORIZON-CL4-2025-02-42: 2 proposals

·HORIZON-CL4-2025-02-43: 2 proposals

·HORIZON-CL4-2025-02-44: 1 proposal

·HORIZON-CL4-2025-02-45: 4 proposals

·HORIZON-CL4-2025-02-46: 5 proposals

·HORIZON-CL4-2025-02-71: 1 proposal

·HORIZON-CL4-2025-02-72: 3 proposals

·HORIZON-CL4-2025-02-73: 2 proposals

·HORIZON-CL4-2025-02-74: 2 proposals

·HORIZON-CL4-2025-02-81: 1 proposal

 

Evaluation results are expected to be communicated at the latest on 25 February 2026.



Last Changed: July 25, 2025

On 6th June 2025, the Critical Space Technologies for EU non-dependence InfoDay was organised, specifically addressing the topics included in the Horizon Europe Cluster 4 Work Programme 2025 (topics HORIZON-CL4-2025-02-SPACE-71/72/73/74). The event presentation and Q&A document are publicly available via the following links:

Critical Space Technologies Info Event - presentation 1

- Critical Space Technologies Info Event - presentation 2

Critical Space Technologies Info Event - Q&A document

Last Changed: June 12, 2025

Please note that due to a technical issue, during the first days of publication of this call, the topic page did not display the description of the corresponding destination. This problem is now solved. In addition to the information published in the topic page, you can always find a full description of the destination 5 “Open strategic autonomy in developing, deploying and using global space-based infrastructures, services, applications and data” that is relevant for the call in the Work Programme 2025 part for “Digital, Industry and Space”. Please select from the work programme the destination relevant to your topic and take into account the description and expected impacts of that destination for the preparation of your proposal.

Last Changed: June 5, 2025

The issue 2 of the Technical Guidance Document has been released. It differs from the previous version in the section focused on Connectors and related technical requirements.

Last Changed: May 22, 2025
The submission session is now available for: HORIZON-CL4-2025-02-SPACE-12, HORIZON-CL4-2025-02-SPACE-44, HORIZON-CL4-2025-02-SPACE-13, HORIZON-CL4-2025-02-SPACE-43, HORIZON-CL4-2025-02-SPACE-46, HORIZON-CL4-2025-02-SPACE-21, HORIZON-CL4-2025-02-SPACE-71, HORIZON-CL4-2025-02-SPACE-32, HORIZON-CL4-2025-02-SPACE-24, HORIZON-CL4-2025-02-SPACE-22, HORIZON-CL4-2025-02-SPACE-31, HORIZON-CL4-2025-02-SPACE-41, HORIZON-CL4-2025-02-SPACE-81, HORIZON-CL4-2025-02-SPACE-11, HORIZON-CL4-2025-02-SPACE-23, HORIZON-CL4-2025-02-SPACE-74, HORIZON-CL4-2025-02-SPACE-72, HORIZON-CL4-2025-02-SPACE-42, HORIZON-CL4-2025-02-SPACE-73, HORIZON-CL4-2025-02-SPACE-45
Space Critical EEE Components for EU non-dependence – Advanced Packages and Memories | Grantalist